Lubrication of open tooth systems

Optimal supply of tooth systems is ensured over very long periods using the Lubricus lubricating gearwheel.
The Lubricus lubricating system provides a variable lubricant supply.

The lubricant passes through the axle and appropriate holes in the foam material. With just a low pressing pressure, the stored lubricant is released again. The PU foam used (open-cell) stores the lubricant and releases it again in very small dosing quantities. In this way, over lubrication is effectively prevented, as is possible wear caused by a lack of lubrication. The lubricating gearwheels are available with both straight as well as sloping right/ sloping left teeth (module 2-30). From a width of 20mm, the lubricating gearwheel is comprised of several segments. Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.

 

Schmierzahnrad Schmierzahnrad Schmierzahnrad

Lubricus & Schmierzahnrad Gerade Befestigungsachse für Schmierzahnräder Rechtwinklige Befestigungsachse für Schmierzahnräder
Lubricus & lubricating gearwheel Fastening axle straight
for lubricating gearwheel
Fastening axle angled
for lubricating gearwheel
 

Technical Data

Material: Polyurethane foam, open-celled
Operating temp. range: -30°C to +150°C
Speed at the surface: max. 5m/s
Density: 240 kg/m3
Application: suitable for oil and grease
 
Lubrication gear
PU-foam, temperature range: -30°C to +150°C
Straight
Sloping Figures right rising
Sloping left rising
  Module Width Art-No. Art-No. Art-No.
Lubrication gearwheel Module 2, without axle 02 20 mm LAT-SZ-G-2 LAT-SZ-R-2 LAT-SZ-L-2
Lubrication gearwheel Module 3, without axle 03 30 mm LAT-SZ-G-3 LAT-SZ-R-3 LAT-SZ-L-3
Lubrication gearwheel Module 4, without axle 04 40 mm LAT-SZ-G-4 LAT-SZ-R-4 LAT-SZ-L-4
Lubrication gearwheel Module 5, without axle 05 50 mm LAT-SZ-G5 LAT-SZ-R5 LAT-SZ-L5
Lubrication gearwheel Module 6, without axle 06 60 mm LAT-SZ-G-6 LAT-SZ-R-6 LAT-SZ-L-6
Lubrication gearwheel Module 8, without axle 08 80 mm LAT-SZ-G8 LAT-SZ-R8 LAT-SZ-L-8
Lubrication gearwheel Module 10, without axle 10 100 mm LAT-SZ-G-10 LAT-SZ-R-10 LAT-SZ-L-10
 
Axles
Different fastening axles are available for the lubricating gearwheels. Dependent on the installation or supply of lubricant, right-angled or straight axles can be used.
Straight axle
Fixing of
axle
Thread
hollow axle
Width Art-No.
M10 M6 20 mm LAT-A-2
M10 M6 30 mm LAT-A-3
M10 M6 40 mm LAT-A-4
M10 M6 50 mm LAT-A-5
M16 R1/8“ 60 mm LAT-A-6
M16 R1/8“ 80 mm LAT-A-8
M16 R1/8“ 100 mm LAT-A-10
Angled axis
Fixing of
axle
Thread
hollow axle
Width Art-No.
M8 M10x1 20 mm LAT-A-2G
M8 M10x1 30 mm LAT-A-3G
M8 M10x1 40 mm LAT-A-4G
M8 M10x1 50 mm LAT-A-5G
M8 M10x1“ 60 mm LAT-A-6G
M8 M10x1 80 mm LAT-A-8G
M8 M10x1 100 mm LAT-A-10G